Spanish 
English 
Communication gateway CANBUS-USB API own programming Linux.
General characteristics
- CANBUS interface 1Mbit opto-isolated.
- Linux programming interface for programming in C / C ++.
Media converter VDX-TS-COM10
The VDX-TS-COM10 is a media converter between profibus and multimode fiber optic. Convert profibus signals from cable to fiber optic provides remarkable advantages in industrial plants, such as, immunity to electrical noise and independence in fiber lengths for signal transport.
The VDX-TS-COM10 is equipped with a highly advanced control electronics that allows high-speed data flows in industrial environments and independent conversion of the protocol used. The conversion is made at the physical level from electrical signal to optical and vice versa.
This technology is applicable to any protocol on the RS485 communications interface. The data signal received by RS485 is transmitted by both fiber optic interfaces. The optical signal received by any of the 2 receivers is converted to the RS485 electrical signal, output by the DB9 connector and by the transmitter of the other optical fiber.
The TS-COM10 is manufactured in ABS plastic of great robustness. It has a DIN rail connection on the back.
Media converter VDX-TS-FIBRACANBUS-V5
The equipment VDX-TS-FIBRACANBUS-V5 consists of an intelligent router-media converter between CANBUS copper and multimode fiber optic. It is equipped with the most advanced control electronics to allow high speed data flows in industrial environment. Converting a CANBUS communications signal from cable to fiber optic gives us many advantages such as noise immunity and fiber length independence. In addition, the equipment has configurations for independent speed for each of the electrical and optical interfaces.
The VDX-TS-FIBRACANBUS-V5 is made of ABS plastic with great robustness and has a DIN rail connection on the back.
General characteristics
- 1 DB9 optocoupled electric CANBUS interface.
- 2 TX / RX multimode fiber interfaces.
- TX and RX status LEDs for each interface.
- 100MIPS microcontroller. CANOPEN intelligent device.
- Routing of packets to each interface.
- Broadcast packages
- Selective routing
- LCD blue backlight 2×16 characters.
- Switches for end of line in PCB.
- Switches for electrical interface speed selection.
- 24VDC power supply.
- ABS plastic box.
- Equipment adapted to DIN rail.
How it works
This equipment performs data conversion at the network level between its electrical and optical interfaces. and vice versa. The team is equipped with routing intelligence at the CANOPEN protocol level and is able to redirect the packets to the necessary interface at each moment.
Network controller VDX-TS-PC103
The VDX-TS-PC103 is a network driver based on Linux 2.6.32.4 with different I / O interfaces, Ethernet and digital coprocessor.
General characteristics
- Aluminum case following the PC104 standard with rubber bands.
- 24VDC power supply protected with DC / DC.
- ARM9 processor S3C2440A with 200 bogomips.
- FPGA Xilinx Spartan3 for digital processing.
- 64Mb RAM, SD.
- 10 Mbit Ethernet.
- RTC.
- 7 Opto-isolated digital inputs and 7 outputs.
- 3 Opto-isolated RS-232 ports.
Lighting for artificial vision VDX-TS-ETHLUX_V2
The VDX-TS-ETHLUX_V2 is an intelligent network device for lighting artificial vision scenes. The unit integrates an SNMP-ETHERNET controller for lighting control remotely and easily.
Characteristics of the equipment
- 48 MIPS microcontroller.
- 1 Ethernet 10 Mbit.
- Stack of SNMP-ETHERNET communications.
- Watchdog.
- 24V DC / DC power supply with galvanic isolation.
- 15 Possible levels of LED lighting.
- 1 Optoisolated digital input.
- 4 Switches for configuration and operation.
- EEPROM for storage of operating parameters.
- Tubular aluminum housing.
- Stainless support
